Putting the ahh! Back into your Spa
Specialists in Portable Spa
Maintenance
Installation
1. Remove filter(s) and perform visual check of filter condition.
2. Check plumbing including pipe and heater unions and isolation valve
connections for integrity and identify where possible any leaks present.
3. Check all worn or defective joint O-
4. Check jet body to hot tub shell joints for integrity where possible any leaks present.
5. Run all pumps to ensure satisfactory operation.
6. Check operation of system diverter valves, if fitted, and air control operation.
7. Check all jets for satisfactory operation – ensure they turn on & off if applicable.
8. Operate air blower, if fitted, and check satisfactory operation. Visually check
that all the air injectors are allowing air through.
9. Check visually all equipment interconnecting wiring for integrity and insulation.
10. Check the control system and topside controls for operation of each function.
A. Jet Booster pump(s), B. Circulation Pump (if fitted), C. Blower (if fitted), D.
Filter Cycle setting (if available), E. Heating capability, F. Mode system.
11. Deep clean and sanitise the hot tub plumbing and pipe work system including
pump wet end and heater tube.
12. Test the hot tub LED and lighting system.
13. Drain water from the hot tub and system.
14. Rinse spa thoroughly, drain and vacuum out majority of excess water from
pipe work and jet bodies.
15. Wipe clean Hot Tub shell surface.
16. Refill with clean water to the required operating level.
17. Fit new or cleaned filters into the hot tub skim filter. (Filters used will be
customers own pre-
18. Add pH+ or pH-
19. Add Sanitiser to achieve a level of 2-
Bromine. (see note)
20. Check operation of all Spa equipment from the control touch pad. Check
operation of the heater and mode functions.
21. Vacuum skimmer and pump suctions fittings.
22. Perform a test of the RCD if available and accessible.
23. Wipe down acrylic rim
Repairs
Repairs can be undertaken on most makes of Spa/Hot Tub. All areas covered. Please contact us for Call out charges for your area.
Servicing
All chemicals and accessories purchased with any of the services mentioned below qualify for a 10% discount.
Annual Service
We offer an annual thorough 23 point service see below.
Refresh
Regular water and filter changes for busy professional people. Four visits per year to include drain down, clean, filter clean/change (as required) shock dose and re balance of pH. You do not need to be at home for this visit as long as we can access a power point and your garden hose.
(Your filters will be cleaned & reused as replacements unless new ones are purchased).
Winterising
For those of you who choose not to use their Hot tub in the winter.
Shock dose spa and run for full cycle. Check operation of spa. Fully drain and clean surface and filters. Remove all unseen water from pumps and other equipment. You will be informed of any problems with your spa. Minor problems will be solved as part of service.
Spring Clean
Reopening your spa for the new season!
Thoroughly clean spa surface and filters. Fill and add shock dose treatment. Check operation of spa. Re balance pH. You will be informed of any problems found with your spa. Minor problems will be solved as part of service.
